Custom-Wizard Other Kuryakyn Lighting & Accessories

Kuryakyn Lizard Lights

The chameleon of L.E.D. accent lights offers three spectacular modes:

Single color steady illumination

Single color flashing illumination with variable rate

Paint Mode: All lights, in unison, continuously fading into and out of each of the seven colors (red, lime, ice blue, sky blue, dark blue, purple, green). The rheostat can be used to adjust how quickly the lights fade from one to the next.

Carefully engineered to draw very little current, there is no need to worry about draining your bikes battery (provided the battery is in good condition and the lights are not left for more than a couple hours). The controller is capable of running up to 16 lights.

Make your bike a showstopper with our Seven Color Lizard Lights that offer you everything you need to make quite a statement and more.

Kuryakyn Radiator Side Trim for Honda VTX1800
Designed by Who Did It, Inc.

Instant Pizzazz! Add this classy chrome and L.E.D. trim to the sides of your VTX1800 radiator and watch it come alive. Sturdy, gleaming chrome inserts attach easily and really dress up a part of the bike the factory tries to camouflage.

Kuryakyn Top or Bottom Radiator Trim
Designed by Who Did It, Inc.

A great dress-up item for your radiator! A beautiful chrome finish, beveled edges and an array of amber L.E.D.s will really add a touch of class. Measuring 1" x 6-7/8" use on a variety of makes and models is possible. Installs with ease!

Kuryakyn Two-Piece Fork Mounts
Our sturdy, chrome-plated mounts are just the ticket to attach Silver Bullets (or custom lights using 5/16-inch mounting hardware) to fork tubes. 39mm, 41mm, and 49mm sizes are offered to fit many popular models.

Kuryakyn Chrome P-Clamps
One slick little clamp, our chrome-plated stainless steel P-Clamp as many uses. It works great for mounting Silver Bullets or other lights to frame tubes or engine guards. Its hinged design makes installation easy. Mounting is very secure because our clamp is secured to the tubing by both a flat head screw and the fastener used to attach the accessory. The clamp has a 5/16-inch mounting hole.

Kuryakyn Bullet Light Mounting Kit
Designed expressly for installing our Silver Bullets or Mini Bullets on Metric Cruiser fender struts. This kit makes it easy! Specialized hollow mounting studs are 3/8&quot-16 on one end to thread into the light body and M8-1.25 on the other end to install in place of a fender strut mounting bolt on most metric cruisers. Light sold separately, select from any of the Silver Bullets with 3/8&quot-16 hollow mounting bolts or any of our L.E.D. Mini Bullets.

Kuryakyn Deep Dish Bezels with Lenses for Metric Cruisers
Freshen up the dated look of stock turn signals with these deep dish bezels with smoke lenses and colored bulbs. The bezel and lenses install easily on the stock housing using stock hardware. Red and Amber versions on also available and retain stock bulbs.

Kuryakyn Large Visored Bezels
An inexpensive way to change the look of your L.E.D. or Halogen Silver Bullets. Replacement visors install in minutes. Our smoothly contoured visors can be used to compliment custom headlights or spotlights. We offer three versions of each size visor making it possible to outfit any Silver Bullet with the visor in any orientation you choose; top, bottom, inside, or outside. Sold in pairs, visors mount with existing hardware.

Kuryakyn Small Visored Bezels
An inexpensive way to change the look of your L.E.D. or Halogen Silver Bullets. Replacement visors install in minutes. Our smoothly contoured visors can be used to compliment custom headlights or spotlights. We offer three versions of each size visor making it possible to outfit any Silver Bullet with the visor in any orientation you choose; top, bottom, inside, or outside. Sold in pairs, visors mount with existing hardware.

Kuryakyn Standard & Accent Visor Bezels
An inexpensive way to change the look of your L.E.D. or Halogen Silver Bullets. Replacement visors install in minutes. Our smoothly contoured visors can be used to compliment custom headlights or spotlights. We offer three versions of each size visor making it possible to outfit any Silver Bullet with the visor in any orientation you choose; top, bottom, inside, or outside. Sold in pairs, visors mount with existing hardware.

Kuryakyn Replacement Lenses for Small L.E.D. Silver Bullets
Changing lens color on L.E.D. Silver Bullets does not alter the color emitted!

Warning: L.E.D. Lenses cannot be used with Halogen Silver Bullets.

Kuryakyn Replacement Lenses for Halogen Silver Bullets

Kuryakyn Bezels and Lenses for Mini Bullets
Add a sleek new look to your current Mini Bullet lights with a chrome bezel and jewel-like lenses. Each set includes chrome bezels and three sets of lenses (red, amber, and clear). It's all the little things that count!

For use as replacement lenses for Mini Bullets (P/Ns 2385, 2386, 2387, 2388)

Note: Changing lens color on L.E.D. Mini Bullets will not alter the color emitted.

Kuryakyn Universal Wiring & Relay Kit
When using Halogen Silver Bullets as additional driving lights, we strongly recommend wiring them separately to avoid overloading the headlight circuit. Our kit provides you with a switch, relay, universal wiring harness and general instructions for installation. The kit is not intended for any particular application, but is easily adaptable to any motorcycle.

Kuryakyn Load Equalizer
This universal 4-Amp load equalizer works great in custom applications where OEM turn signals have been removed and replaced with low draw L.E.D. or small incandescent turn signals.

Kuryakyn Diode Kit for Metric Bikes
This kit is required when installing L.E.D. lights as turn signals on a motorcycle with a single turn signal indicator light. If this diode kit is not installed, power will back feed across the indicator light and all turn signals will flash at once.

Kuryakyn Run-Turn-Brake Controller
A marvel of electronic wizardry, this module makes single filament or single circuit turn signals on the rear of the bike function as running lights, turn signals, and brake lights! The module wires in beneath your seat and is intended for use with L.E.D. or Halogen Silver Bullets or other custom turn signals you have installed on your bike. The unit will work fine with stock turn signals as well, but you will have to find red lenses from another source.

Kuryakyn Plug and Play Run-Turn-Brake Controller for Honda
Change your turn signals into running, turn and brake lights and light up the back of your motorcycle for increased visibility. This plug and play controller connects directly into the stock OEM wiring harness under the seat with no need to splice any wires. Simply finish off the installation with the required red turn signal lenses, or bulbs if you have clear lenses, for the rear of your motorcycle.

Kuryakyn Plug & Play Run-Turn-Brake Controller for Yamaha
Change your turn signals into running, turn and brake lights and light up the back of your motorcycle for increased visibility. This plug and play controller connects directly into the stock OEM wiring harness under the seat with no need to splice any wires. Simply finish off the installation with the required red turn signal lenses, or bulbs if you have clear lenses, for the rear of your motorcycle.

Kuryakyn Rainbow Strobe
The Rainbow Strobe is a small cage assembly that slips over an H-4 style halogen bulb, creating a colorful pattern within the headlight. Although the beam is, for the most part, unaffected, some blue, green, and red coloring occurs. Installs with ease on any H-4 halogen bulb with three prong (P43t) base. Check regulations fro suitability in your area.

Note: A single headlight vehicle can use either a left or right strobe.

Kuryakyn Replacement Headlight Bulbs
These bulbs are the most common H-4 bulbs used in motorcycle applications. They have a 3-prong (P43t style) base. Direct replacement for '80-'97 GL and all Valkyrie (except interstate) as well as all other bikes using H-4 style bulbs with a P43t base.

Kuryakyn Replacement Halogen Bulbs for Silver Bullet Lights
Note: 35 Watt bulbs should be used only with clear lenses in driving light applications. Excessive heat may damage colored lens coating.

Kuryakyn Super Bright L.E.D. Reflector Bulbs
These bulbs are the ideal way to convert Halogen style Silver Bullets or similar lights to L.E.D. Enjoy the low draw and low heat benefits of L.E.D. by simply changing bulbs.

Note: Because of the very low amperage drawn on these L.E.D.'s a load equalizer is required and sold separately.

Kuryakyn Iridium Coated Red Incandescent Bulb
This bulb looks psychedelic, but it glows as red as the cherries on a cop car. This is the best red bulb we have been able to locate, it absolutely will not fade to pink over time. They may cost a little more, but if you are running a clear or smoked lens, this is the only way to go. Replaces 1157, two circuit bulbs.

Kuryakyn Xtreme White Plus H4 Anti Vibration PIAA Bulb
It’s sad but true that as you get older, a little more light really helps you see and read things better. Professional truck drivers, endurance racers, off-road racers, and anyone that drives for a living knows the name PIAA. You just can’t buy better high-quality bulbs. The beauty of their high performance lighting products is that they do not draw any more amperage than stock bulbs, but through advanced coatings and technology, they emit as much light as a standard bulb of nearly twice the wattage. Not only are they brighter, but the light is whiter making it much easier for the human eye to see than the dull yellow light cast by standard halogen bulbs.

You will really be impressed. These bulbs are built specifically for power-sports applications so you can be assured your investment will be well worth the money spent.

By utilizing quartz glass which is stronger than a standard H4 bulb, PIAA’s Anti-Vibration bulb allows better dissipation of heat. A thicker diameter filament support is fixed to the glass tube allowing the bulb to withstand a large range of motion. The Xtreme White Plus Technology adds a blue top coat on the bulbs adding a slight blue tint to the lamp without sacrificing performance.

Kuryakyn Super Plasma GT-X H4 PIAA Bulb
The H4 Super Plasma GT-X Bulb uses PIAA’s twin color technology to provide a Super Plasma low beam which produces a bluish-purple look and a Super White high beam for superior light output — the best of both fashion and function.

Kuryakyn Xtreme White PIAA Bulb
Xtreme White H3 Bulbs are a great upgrade for your factory motorcycle headlamps. They provide a brilliant Xtreme cool white light rated at 4150K to enhance your headlights.

Kuryakyn Super Plasma GT-X H3 PIAA Bulb
For a stylish look, PIAA offers the Super Plasma H3 Bulb. With a rating of 5000K, it will give your factory lights a beautiful bluish-purple look. No need to sacrifice performance for style. With PIAA’s XTRA technology you’ll have plenty of power.

Kuryakyn Xtreme White Plus 1156 Single Filament PIAA Bulb
Match this bulb to both headlights and other accessory lights for a sleek, unified appearance. Choose from a single filament or dual filament for your specific application. This bulb is used for turn signals and stop lights making you more visible for a safe and enjoyable ride.

Kuryakyn Xtreme White Plus 1157 Dual Filament PIAA Bulb
Match this bulb to both headlights and other accessory lights for a sleek, unified appearance. Choose from a single filament or dual filament for your specific application. This bulb is used for turn signals and stop lights making you more visible for a safe and enjoyable ride.

Kuryakyn Red 3157 Style Taillight Bulb
This bulb is just the ticket for bikes with clear or smoke turn signal lenses.

Kuryakyn Colored Turn Signal Bulbs
These red and amber bulbs are just the ticket for bikes with clear or smoke turn signal lenses.

Kuryakyn L.E.D. Replacement Bulbs
A. L.E.D. Bulbs

These are the best L.E.D. replacement bulbs on the market. Each bulb features 32 mega-bright red or 32 super bright amber L.E.D.s in a completely sealed package. The unique design provides full hemispherical illumination; you won't believe the improvement over an incandescent bulb. It's dimensions are the same as a standard 1157 or 1156 incandescent bulb so it can be used as a direct replacement for those applications.

Note: Because of the very low amperage drawn on these L.E.D.s a load equalizer is required.

B. L.E.D. Wedge Bulbs

An L.E.D. replacement for 12 volt #161 or #168 style push-in bulbs. These are a great way to reduce the load on your charging system if you've added additional lights! Available in red or amber.

C. L.E.D. Bulbs

An inexpensive way to upgrade from incandescent to L.E.D. bulbs. Advantages include low draw, long life, and resistance to vibration. Due to the directional design of these bulbs, it is necessary that the bulb face the lens for proper illumination. Not recommended for '99-E'03 taillights or '86-'07 flat lens turn signals found on Dresser, Road King or Heritage models.

Note: Because of the very low amperage drawn on these L.E.D.s a load equalizer is required.