Custom-Wizard Anti-Corrosion Accessories

Maintenance & Repair > Anti-Corrosion Accessories



	ACF-50 Anti-Corrosion Formula Ref: ACF-50 Stops Corrosion dead in its tracks for up to TWO YEARS!! MCN says: ' It should probably come supplied with every new bike!' ACF-50 (Anti-Corrosion Formula) was originally designed to protect aircraft from existing and new corrosion and is now available to motorcyclists. Aviation products have to meet rigorously high standards & ACF-50 not only meets these but has been awarded Aviation approvals - MIL-SPEC 81309 types II & III which means it is 'approved for ferrous and non-ferrous metals, electrical systems and electronic components'. The US Navy carried out tests using ACF-50 on the jets on their Aircraft Carriers. They found that ACF-50 so significantly reduced the corrosion they had previously experienced they now use ACF-50 all the time! It works in that type of harsh environment so imagine how well it's going to protect your bike! When applied ACF-50 forms an 'Active' ultra-thin clear film that will kill any existing corrosion cells and will protect your bike against new corrosion forming. On areas such as switches or under the tank & seat, one application will last up to 12 months. Other more exposed areas will need topping up more regularly. ACF-50 has the ability to 'chemically neutralise road salt' and water will bead on contact and literally bounce off. Ideal for bikes that are used all year round. A superb service spray as ACF-50 is also a lubricant and penetrate (without loosening structural attachments) and if you put your bike away for the winter, applying ACF-50 will ensure that moisture will not be allowed to cause any damage! Untreated moisture will creep into cracks and will not freely evaporate - ACF-50 actively ejects moisture from these areas. ACF-50 holds written OEM approvals from the following manufacturers: Douglas/Boeing Helicopter, ATR Regional Transport, Bell Helicopter Textron, Gulfstream Aerospace, British Aerospace, Concorde Battery, Raytheon Aircraft, Rolls-Royce, Learjet, and Canadair. How to Use: ACF-50 is 95% product, hence virtually no propellant. Keep the tin in a warm environment, shake very well before use & remember a little ACF5-0 goes a long way, so keep a rag handy to soak up any excess - then use the rag to help spread the product. ACF-50 has strong capillary action so will creep into all the areas that moisture can, 'actively' pushing out moisture & replacing it with protection. Go cautiously when applying to callipers to ENSURE YOU KEEP IT OFF THE BRAKES. Use ACF-50 anywhere, except the brakes, on your bike including the engine & exhaust (will smoke on first start and burn off down pipes but still slows down corrosion process). Safe on paintwork, most rubbers & brings up black plastic trim a treat. ACF-50 contains no water & is approved for electrics so spray directly into electrical joints & components where it will prevent corrosion induced failures & high resistance joints. Works well at stopping dirt, mud & salt from sticking. You can come back from a winter ride with the bike 'white with salt' - a quick wash off and it's gone with the bike still protected. Areas not in direct contact with the elements ie tank/seat areas, electrics require treating approx once a year. Other exposed areas re-apply as necessary. You can tell the product is still 'Active; as water will bead on contact...having no water content & not being water soluble ACF-50 only dissipates by being 'sacrificial' whilst stopping existing or new corrosion so just re-treat as required. Remember, ACF-50 protects jets on US aircraft carriers! If it works for these jets in these conditions, think how well it's going to work for your bike! Price: £13.00 (Including VAT at 17.5%)
	Quantity:

Maintenance & Repair > Anti-Corrosion Accessories